Our Langstroth 10-frame beehives are fully assembled and come with a varroa mesh floor, reversible door, an Australian-style roof, and each of our brood/deep super bodies come supplied with 10 assembled frames (Note that none of our frames come with wiring or foundation). Good ventilation is maintained throughout the hive with mesh-covered vents in the base and in the Australian-style roof which fits neatly over the feeders. Floor with varroa mesh for mite control and ventilation, and a pull out drawer. Reversible door that can close the hive for moving or provide a good-sized entrance. Brood / deep super boxes featuring metal frame rails and hand holds on all four sides. Adding a queen excluder (not included) will enable one more of these to be used as supers. Australian-style roof with galvanised steel capping. The Australian-style roof fits flush over the lower sections, rather than overlapping, thus leaving space for various feeder options. It features four mesh-covered ventilation slots that slope downwards to keep out rain. Now the most popular roof design in use around the world. Our 5-frame Langstroth Nucleus Box comes fully assembled with integral floor, reversible entrance block door, frames and metal covered Australian-style roof. Our assembled Langstroth breeding hives. 3 Section – Three sections for three separate 3-frame colonies, each with its own closable entrance and feeder. Groups of 3 frames are separated by removable plywood dividers and each group has its own syrup feeder. Comes supplied with standard Langstroth brood frames. 4 Section – Four sections for four separate 2-frame colonies, each with its own closable entrance and access to a shared top feeder. Groups of 2 frames are separated by removable plywood dividers. Top feeder for Langstroth 10-frame hives with high capacity. Fits in the roof space covering the whole top of the hive, whilst still retaining plenty of ventilation. Made from thick ABS plastic, it is also an excellent insulator. Top feeder for Langstroth 5-frame Nucleus hives with dual purpose. Fits in the roof space covering the whole top of the hive, whilst still retaining some ventilation. Has a large capacity for syrup feeding plus a separate lidded area for feeding fondant at the same time. (Please note that colours may vary from those pictured). Useful hanger to hold frames as they are removed from the hive. Hooks onto the side of the brood or super and securely holds up to 4 frames. Made from galvanised steel. Fully assembled Langstroth brood frames in packs of 10. Require wiring, 4 holes drilled each side for the wire. Top bar grooved for the foundation. Hoffman style with chamfered edges to minimise surface to surface contact, so easier to separate in the hive. Top quality materials and construction. Our beehives are manufactured in small factories in Greece using sustainably sourced pine from Austria and the Czech Republic. We supply these hives as they come from the factory, and they will need some minor preparation (filling and sanding) before painting or varnishing. They are made to be functional rather than decorative, though with very little work a perfect finish can be obtained. We believe that the quality of materials used is most important. Please look carefully at our photos as these are typical of the hive you will receive. Langstroth hives are by far the most popular standard around the world and the simplest to construct. They are therefore the perfect choice for beginners and experienced beekeepers alike. Large stocks always available.