• Tag Archives: 4g63

KELFORD Beehive Valve Spring +Titanium Retainer Kit FOR MITSUBISHI EVO 1-9 4G63

• • admin
• • November 26, 2020
  • November 26th, 2020
• • kelford
• • 4g63 beehive kelford mitsubishi retainer spring titanium valve

MITSUBISHI 4G63 DOHC EVO 1-9. High Performance PACALOY Beehive spring and Titanium retainer set. Suits high RPM, high boost competition engines. Maximum valve lift is 13.50mm. The item “KELFORD Beehive Valve Spring +Titanium Retainer Kit FOR MITSUBISHI EVO 1-9 4G63″ is in sale since Thursday, December 14, 2017. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Other”. The seller is “cjmotor” and is located in Brisbane. This item can be shipped worldwide.

• Manufacturer Part Number: KVS63-BTK
• Brand: KELFORD

GSC Beehive Valve Springs Mitsubishi Lancer Evo 8 9 4G63T 4G63

• • admin
• • September 9, 2020
  • September 9th, 2020
• • beehive
• • 4g63 4g63t beehive lancer mitsubishi springs valve

GSC Beehive Valve Springs Mitsubishi Lancer Evo 8 9 4G63T 4G63. Car Make: Mitsubishi Car Model: Evo 8-9 Engine: 4G63T Inertial Weight: 3. For EVO 8/9 ONLY. For EVO 1-7 and DSM, please see GSC5040 which includes springs and Ti retainers. GSC Power-Division Beehive springs feature some of the most impressive manufacturing techniques in the industry. Our beehive spring uses an ovate wire which utilizes advanced material heat treatment methods for superior load loss capabilities. What this means to you is our spring has the highest level of spring load retention while still maintaining good fatigue threw out the life of the spring. Only the best materials go into the GSC Power-Division Beehive valve spring. Each batch is scrutinized for tensile strength properties, ductility, inclusion content, and fatigue toughness. The beehive valve spring shape has become the buzz lately. While some might find that the beehive spring design is new it has been used commonly in many OE engines as well as in all of the NASCAR and F1 engines of today. The beehive shape is more stable than standard single or dual cylindrical springs. The beehive design which incorporates an ovate wire is more than capable of the performance demands that were previously only matched by a Dual Springs. With the smaller and lighter retainer used on the beehive valve spring allow for higher RPM and more valve control. So beehive valve springs, with there lighter weight retainers allow for engine’s to rev quicker and maintain a more stable valve motion than the traditional cylindrical springs of yesteryear. Less stress on valvetrain components. Lower spring frequency for more precise valve control. More valve control equals more aggressive cam profiles. All of these items help to return more power for you to enjoy! The GSC 5039 Beehive spring is a factory replacement and will use your stock OEM retainer and valve seat to ensure an easy and inexpensive upgrade for your upgraded camshafts. 5039 Beehive spring pressure. 1.56=68 lbs /. 625= Coil bind. 5039 Beehive Rev and Boost range (using an S2 profile camshaft set). Max boost: 25 psi. 5039 Beehive Max lift. Do to stock retainer max lift is 11.3mm at the valve or. 259 cam lobe lift. Please message us for a Return Authorization Number before sending anything back to avoid processing delays. Real Street Performance is unlike most “Race Shops”. We are a fully functioning wholesale and retail distribution warehouse in addition to a dyno-equipped tuning and engine building facility. Our sales center and order fulfillment center operates with state of the art, industry leading software that allows us to get you ALL of the parts you need for your build quickly and correctly the first time without the headaches or excuses. Sign up to our Newsletter. The item “GSC Beehive Valve Springs Mitsubishi Lancer Evo 8 9 4G63T 4G63″ is in sale since Saturday, July 27, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Valves & Parts”. The seller is “realstreetrsp” and is located in Sanford, Florida. This item can be shipped worldwide.

• Engine Codes: 4G63T
• Vehicle Make: Mitsubishi
• MPN: 5039
• Brand: GSC Power Division

SUPERTECH Beehive Valve Springs & TITANIUM Retainers Mitsubishi Evo 4 9 4G63

• • admin
• • April 28, 2020
  • April 28th, 2020
• • supertech
• • 4g63 beehive mitsubishi retainers springs supertech titanium valve

Supertech Uprated Springs for Mitsubishi 4G63. Valve springs + titanium retainers. Supertech offers beehive valve springs for sport compact, domestic and racing applications. Our beehive valve springs offer a lower alternative mass and lower variable natural frequency rate. All of our beehive valve springs are manufactured using superclean chrome silicon vanadium alloy and then heat treated, stress relieved and shoot peened to help improve the fatigue life of the spring. All Supertech valve springs are made with premium Superclean Chrome Silicon Vanadium Steel alloy for higher performance & durability at high rpms. Using high quality steel alloy allso provides the added benefit of better structural memory for all of our springs. Our valve springs are computer designed to ensure that wire stress levels do not overpass the limits of stress defined in the diagrams of fatigue. We also utalize computer software that allows us to ensure that the harmonics are under control. This combined with our high quality steel alloy enables supertech valve springs to be more durable in extreme conditions, giving your performance racing engine a serious competitive advantage in both perforamnce and durablity. Supertech retainers are manufactured with high quality military certified Titanium alloy, and are CNC machined for a tight fit. Our high quality retainers are among the best in the industry. Check our other product. The item “SUPERTECH Beehive Valve Springs & TITANIUM Retainers Mitsubishi Evo 4 9 4G63″ is in sale since Saturday, December 8, 2012. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Engine, Tuning & Chips\Other Engine Tuning”. The seller is “kidzio” and is located in Mroków. This item can be shipped worldwide.

• Country/Region of Manufacture: United States
• Manufacturer Part Number: SPRK-M1007BE-1
• Brand: Mitsubishi
• Part Manufacturer: Supertech

Kiggly steel STREET Beehive Valve Spring set for Mitsubishi 4G63 4g63T 1010 EVO

• • admin
• • March 26, 2020
  • March 26th, 2020
• • kiggly
• • 4g63 4g63t beehive kiggly mitsubishi spring steel street valve

Kiggly steel STREET Beehive Valve Spring set for Mitsubishi 4G63 4g63T 1010 EVO. NOTE: ACTUAL PRODUCT MAY DIFFER SLIGHTLY FROM PHOTOS. Utilizing the same proven PAC Racing ovate beehive springs as our High Pressure kit, our Steel Street spring kit features FEA-optimized and heat treated steel retainers. This kit was designed using the OEM spring seats. Kiggly Racing LLC offers this set as a cost effect, drop-in replacement the 4G63 applications looking to spin up to 10,000rpm and run up to 40psi boost. Seat pressure is 85lbs at 1.475. EVO 1-9 and DSM. Founded by Racers and for Racers. We are here to provide you with help for all your performance needs! -Customer service around the clock. As racers ourselves we know the struggles of searching for a place you can trust and depend on. With over 15 years in the industry we have done drag racing, engine building, dyno tuning and much more which has helped us along the way in order to provide the best customer service possible and give you some of the answers you may need when debating on what product will be better suited for your build. Feel free to message us with any inquiries. A Wholesale program is available for Businesses. Message us for Details! Virgin Islands and any other U. Territory is by the US Postal service. Additional costs may apply. International orders are generally delivered within 7 days from date of order. Extended regions may require up to 14 days to be delivered. The item “Kiggly steel STREET Beehive Valve Spring set for Mitsubishi 4G63 4g63T 1010 EVO” is in sale since Wednesday, December 9, 2015. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Injectors”. The seller is “ostarmotorsportsosm” and is located in Orlando, Florida. This item can be shipped worldwide.

• Brand: Kiggly Racing
• Manufacturer Part Number: 1010
• Country/Region of Manufacture: United States
• Engine: 4g63 4g63T All
• Seat pressure: 85lbs at 1.475″
• Rate: 325lb/in

Kiggly High Pressure Beehive Valve Spring set for Mitsubishi 4G63 4g63T 1030 EVO

• • admin
• • March 21, 2020
  • March 21st, 2020
• • kiggly
• • 4g63 4g63t beehive high kiggly mitsubishi pressure spring valve

Kiggly High Pressure Beehive Valve Spring set for Mitsubishi 4G63 4g63T 1030 EVO. NOTE: ACTUAL PRODUCT MAY DIFFER SLIGHTLY FROM PHOTOS. Fits all 4G63 engines including DSM and EVO. Compatible with all popular cam profiles. Kit Includes: Titanium Retainers, PAC Racing Springs and Treated Steel Seats. 100% Made in the USA. Seat pressure = 97lbs at 1.440. Max recommended lift = 0.500. Min recommended spring height at full lift = 0.900. The Original Beehive Spring Kit for the 4G63 Engine. This thoroughly proven spring set has powered 4g63 vehicles ranging from 6-second drag cars to high-mileage everyday drivers. Introduced in 2006, these were the first beehive valve springs available to the 4g63 platform. They are the best spring set you can use when targeting boost levels up to about 45psi and 11,000rpm. Featuring PAC ovate wire “beehive” springs, designed with s a stress-optimized profile that minimizes spring mass and maximizes natural frequency. This means better stability at high rpm usage. The beehive design also features a variable natural frequency, resulting in better stability during surge points and self-damping. Combining these advanced design features with aerospace quality production and shotpeening results in a high performing, reliable combination. The spring set includes our proprietary titanium retainers and steel seats to achieve an appropriate seat pressure that will prevent excessive wear in long-term street applications. The precision CNC machined grade 5 titanium retainers are optimized for mass and stress levels using finite element analysis and packaged for maximum clearance to the valve stem seals. Any OEM replacement or smaller diameter valve seals can be used and clearance to the retainer is about 14mm. In higher boost drag racing applications these springs can be shimmed for increased seat pressure. The limiting factor in the 4G63 valvetrain is typically boost levels, not RPM. To protect against this, we recommend targeting seat pressure at about 1.7x your absolute manifold pressure (boost + 14.7psi). This tends to be the worst case scenario and varies widely with the engines parts combo. Founded by Racers and for Racers. We are here to provide you with help for all your performance needs! -Customer service around the clock. As racers ourselves we know the struggles of searching for a place you can trust and depend on. With over 15 years in the industry we have done drag racing, engine building, dyno tuning and much more which has helped us along the way in order to provide the best customer service possible and give you some of the answers you may need when debating on what product will be better suited for your build. Feel free to message us with any inquiries. A Wholesale program is available for Businesses. Message us for Details! Virgin Islands and any other U. Territory is by the US Postal service. Additional costs may apply. International orders are generally delivered within 7 days from date of order. Extended regions may require up to 14 days to be delivered. The item “Kiggly High Pressure Beehive Valve Spring set for Mitsubishi 4G63 4g63T 1030 EVO” is in sale since Wednesday, December 9, 2015. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Injectors”. The seller is “ostarmotorsportsosm” and is located in Orlando, Florida. This item can be shipped worldwide.

• Brand: Kiggly Racing
• Manufacturer Part Number: 1030
• Country/Region of Manufacture: United States
• Engine: 4g63 4g63T All
• Seat pressure: 97lbs at 1.440″
• Rate: 325lb/in
• Max recommended lift: 0.500″
• Min recommended spring height: 0.900″

Ferrea Beehive Springs Mitsubishi 4G63T 4G63 DSM EVO 1G 2G Eclipse 6-bolt 7-bolt

• • admin
• • January 14, 2020
  • January 14th, 2020
• • ferrea
• • 4g63 4g63t 6-bolt 7-bolt beehive eclipse ferrea mitsubishi springs

Our special on Ferrea Racing Beehive Spring & Retainer Kits! This listing is for a complete set of 16 x Ferrea Beehive Single Springs for all Mitsubishi 4G63 turbo applications (1G & 2G DSM, EVO 1-9, Talon TSi). This listing includes Ferrea part numbers. Ferrea S2015 x 16 (Single Beehive Springs). This spring set requires the use of both Ferrea E12021 and SL1091. Harmonics or high frequency fatigue is present in all racing engines and will usually destroy the valvetrain if not controlled. Properly designed valve springs will control the dominant harmonics, provide the needed stability, and reduce valvetrain component wear. Ferrea valve springs are developed from high strength alloys, including premium grade chrome silicon steel. Our springs are heat-treated and stress relieved, which dramatically increases the springs life. Ferrea valve springs provide the stability needed for high lift, high rpm racing engines, while minimizing the load loss for todays aggressive valvetrain combinations. Ferreas wide range of retainers are available for Domestic, Sport Compact and Motorcycle markets. We currently offer four different types of retainers to choose from: Titanium, Lightweight Tool Steel, Steel and Aluminum Magnesium retainers, all of which are CNC machined to perfection and offer superior strength and stability. International customers are welcome. We pride ourselves in the offering the best pricing and customer service on the internet! The item “Ferrea Beehive Springs Mitsubishi 4G63T 4G63 DSM EVO 1G 2G Eclipse 6-bolt 7-bolt” is in sale since Friday, April 14, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Valves & Parts”. The seller is “performancepartsnow” and is located in Miami, Florida. This item can be shipped worldwide.

• Brand: Ferrea Racing
• Manufacturer Part Number: S2015
• Interchange Part Number: S2015
• Other Part Number: S2015
• Country of Manufacture: United States